Mykrobak Nutrients Remover
Mykrobak Nutrient Remover utilizes bacteria to degrade nutrients (Ammonia, Nitrogen, Phosphorus) and organic compounds, preventing eutrophication and ensuring wastewater is safe for reuse.
Benefits
High COD & BOD Degradation
Degrades high COD & BOD for effective wastewater treatment.
Improved Dissolved Oxygen
Enhances dissolved oxygen in wastewater, reducing nutrient levels to protect against algal formation.
Increased Nitrification Efficiency
Increases nitrating removal efficiency in the system.
Nutrient Degradation
Degrades ammonia nitrogen, phosphorus, and other nutrients in wastewater.
Composition
Performance properties | |
|---|---|
PH | 6.5 – 7.5 |
Temperature | 5 to 55°C |
Reactivation Rate | 99% After addition to water |
Concentration | Highly Concentrated |
Shelf Life | 2 years |
Physical properties | |
|---|---|
Appearance | Off White Colour |
Physical State | Powdered Form |
Odour | Odourless |
Moisture Content | 6-7% |
Mesh Size | 0.6 mm |
Packaging | 1 kg Aluminum zip lock |
Dosage & Application
Dosage Schedule
Depend upon the organic load, contaminants and volume of waste water
Area of Application
Membrane Bio reactor
Activated sludge Process
Sequencing batch reactor
Moving bed bio reactor
Extended Aeration system
Water Bodies
Application Matrix
Mix Mykrobak 1 kg powder in 20 liter water (prefer normal temperature)
Stir well and remain in bucket for 30 minutes (for bacteria activation)
Directly Dose at inlet of tank
Additional Info
Bacterial consortium belongs to the following:
Hydrocarbon-reducing bacteria
Hydrolytic bacteria
Hyperthermophilic and thermophilic bacteria
Nitrifying and denitrifying bacteria
Photosynthetic bacteria & fluorescent bacteria
Fermentative bacteria
Acetogenic bacteria
Odour control bacteria
Enzymes belong to the co-enzymes of the following groups:
Oxidoreductases
Transferases
Lyases
Advantages of Mykrobak products:
Promote the formation of potential and sustainable biomass
Reduce contaminants, toxicity, pollutants, and bad odors
Initiate biodegradation quickly
Effective in reducing COD/BOD in ETP/STP/WTP
Help in the fastest commissioning of biological treatment processes in ETP/STP, etc.
Boost MLSS production rapidly
Reduce ammoniacal nitrogen
Improve digester system recovery
Increase the efficiency of biogas production
Improve tertiary treatment
Reduce large quantities of organic compounds
Improve the aquatic environment
Clarify ponds and lakes water
Safe and natural
Economically feasible
FAQ
What is Mykrobak Nutrients Remover used for in wastewater treatment?
Mykrobak Nutrients Remover is a biological wastewater-treatment solution developed to help reduce excess ammonia, nitrogen, phosphorus and biodegradable organic compounds in wastewater.
It can be incorporated into municipal and industrial treatment systems to improve effluent quality, support regulatory discharge requirements and reduce the risk of nutrient-rich wastewater contributing to algae growth and eutrophication in receiving water bodies.
How does Mykrobak Nutrients Remover remove nitrogen and phosphorus?
Mykrobak Nutrients Remover supports specialised microbial processes involved in biological nutrient removal.
For nitrogen removal, nitrifying bacteria convert ammonia into nitrite and nitrate under aerobic conditions. Denitrifying bacteria then convert nitrate into nitrogen gas under suitable anoxic conditions, allowing it to leave the wastewater system naturally.
For phosphorus removal, phosphate-accumulating microorganisms take up phosphorus from the wastewater and store it within their cells. The phosphorus is then removed from the system when the phosphorus-rich biological sludge is separated and discharged.
How is Mykrobak Nutrients Remover different from chemical nutrient-removal methods?
Mykrobak Nutrients Remover relies primarily on biological activity rather than chemical precipitation. It introduces or supports beneficial microorganisms that transform nitrogen compounds and incorporate phosphorus into microbial biomass.
Chemical phosphorus removal commonly uses iron or aluminium salts to bind phosphate into insoluble particles. Although effective, chemical treatment can increase sludge mass and chemical-handling requirements.
A biological programme may help reduce reliance on treatment chemicals, support a more sustainable process and integrate with existing activated-sludge or biofilm systems. Where very low discharge limits apply, biological and chemical methods may also be used together, with chemical treatment removing residual phosphorus after the biological stage.
What are the benefits of using Mykrobak Nutrients Remover regularly?
Regular use can help maintain an active microbial population capable of responding to ongoing nutrient loads and changing wastewater conditions.
Potential operational benefits include:
More consistent ammonia and total-nitrogen reduction
Improved biological phosphorus removal
Better effluent quality
Reduced risk of nutrient-related algae growth downstream
Stronger and more stable treatment biomass
Improved recovery following shock loads or process disturbances
Reduced dependence on chemical nutrient-removal programmes
Results depend on wastewater composition, temperature, pH, dissolved oxygen, carbon availability, sludge age, hydraulic retention time and overall plant operation.
5. Does Mykrobak Nutrients Remover support biological treatment performance?
Yes. Mykrobak Nutrients Remover is designed to strengthen the biological processes responsible for nutrient transformation and removal.
By supporting nitrifying, denitrifying and phosphorus-accumulating microbial populations, it can contribute to improved biomass activity, more stable nutrient removal and better overall performance in properly operated biological treatment systems.
The product should be applied as part of a system-specific treatment programme. Dosage and application frequency should be established according to influent nutrient concentrations, wastewater volume, process configuration and the required effluent standard.
